How to Paint Warhammer Miniatures for Beginners
Your first painted Space Marine, Stormcast, or Tyranid does not need to win a Golden Demon trophy. It needs to look like it belongs on your battlefield, tell a little story, and make you want to paint the next one. Learning how to paint Warhammer miniatures is less about owning every paint in the hobby aisle and more about following a reliable order of operations.
The good news for new hobbyists is that Warhammer models are designed with painting in mind. Armor panels, raised icons, teeth, cables, cloaks, and weapons all give you places to build contrast. Start simple, embrace a few happy accidents, and remember that a finished squad looks far more impressive than one flawless miniature sitting alone on a painting handle.
Start with the right hobby setup
You can begin with a modest kit. A few good tools will beat an overflowing paint rack every time, especially while you are finding out which armies and color schemes call your name.
For a practical first setup, gather these essentials:
- Plastic cutters for removing parts from the sprue
- A hobby knife or mold-line remover
- Plastic cement for plastic kits and super glue for resin or metal
- One medium brush, one smaller detail brush, and an old brush for drybrushing
- A primer, a wet palette, water pot, paper towel, and a few acrylic miniature paints
- A painting handle or a temporary grip made from a bottle cap and reusable putty
A wet palette is one of the best early upgrades. It keeps paint workable longer, which makes it easier to apply thin, smooth coats. You can buy one or make a basic version with a shallow container, damp paper towel, and palette paper.
Build and prepare before you paint
Painting starts before the primer. Clip each piece carefully, then trim the little attachment points left by the sprue. Run a fingertip over the model to find mold lines, those faint raised seams that can show up across a shoulder pad or sword blade. Remove the most noticeable ones with a hobby knife or mold-line tool.
You do not need to chase perfection on every hidden surface. Focus on areas the eye will notice: helmets, armor, weapons, banners, and large creatures' limbs. If you are building a unit, consider leaving hard-to-reach parts separate. Shields, backpacks, riders, and big weapons are common subassemblies, but do not turn every model into a dozen tiny projects. For a first squad, fully assembling the miniatures is usually easier and faster.
Before priming, wash resin models in warm soapy water and let them dry. Resin can carry mold-release residue that resists paint. Standard plastic kits generally do not need this step.
Prime for the result you want
Primer gives paint something to grip and reveals details you may have missed during cleanup. Black, white, and gray are all useful, and none is the universal best choice.
Black primer is forgiving and great for darker armies, metallic-heavy forces, and models with lots of recessed detail. White primer makes bright colors pop, making it a smart choice for pale armor, yellow, vivid reds, and Contrast-style paints. Gray lives in the middle and offers a friendly starting point for almost any scheme.
Shake the can thoroughly, spray outdoors or in a well-ventilated space, and use several quick passes from about an arm's length away. Do not try to cover the model in one heavy blast. Thick primer can clog faces, aquilas, chainmail, and the fine details that make a miniature feel alive.
If you want fast dramatic contrast, try a zenithal prime: black or dark primer first, followed by a light spray of white or off-white from above. It creates natural shadows before you apply color. This technique looks especially good on Tyranid carapaces, ragged cloaks, and textured fantasy creatures, but it is optional, not a required initiation ritual.
How to paint Warhammer miniatures in the right order
The simplest reliable process is basecoat, shade, layer, and details. It works for nearly every faction, from a disciplined line of Adeptus Astartes to a chaotic mob of Orks.
Apply thin basecoats
Choose the main colors first: armor or skin, clothing, weapons, metal, and major decorative elements. Thin your paint with a small amount of water on the palette until it flows smoothly off the brush without becoming transparent puddles. Most colors need two thin coats for an even finish.
Load the brush, then wick off excess paint on a paper towel before touching the miniature. This gives you control. Move the brush toward raised edges rather than repeatedly pushing paint into recesses. If you make a mistake, let it dry and paint the surrounding color back over it. Nearly every error in miniature painting is fixable.
Work from the largest areas to the smallest. Paint the armor before the belt buckle, the cloak before the parchment script, and the monster's skin before each individual tooth. This reduces cleanup and keeps the project moving.
Shade the recesses
A shade wash is thin, translucent paint that settles into cracks and around details. It adds instant depth to armor panels, faces, scales, and weapons. A brown shade warms gold, bone, leather, and skin. A black shade deepens steel, machinery, dark fabric, and most battle-worn surfaces.
Apply shade deliberately rather than flooding the entire model without looking. On smooth light armor, a controlled application into panel lines can look cleaner than an all-over wash. On textured chainmail, fur, or a horde of grimy cultists, an all-over wash is fast and effective. This is one of those hobby choices where the right approach depends on the model.
If shade pools on a flat panel, rinse your brush, dry it slightly, and touch the tip to the pool. The brush will pull up the excess before it dries.
Restore color and add highlights
After the shade is dry, use your original base color to repaint raised areas, leaving the darker color in recesses. This step, often called layering, is what makes the miniature look crisp instead of muddy.
For a beginner-friendly highlight, mix a little lighter paint into your base color and catch the most prominent edges. Focus on helmet ridges, shoulder pads, knees, weapon edges, fingers, and folds at the top of a cloak. You do not need to highlight every line. Pick the places that face the light and the areas players will see from across the table.
Drybrushing is another fast option for textured surfaces. Put a small amount of paint on an old brush, wipe off almost all of it, then gently brush across raised details. It is excellent for stone, fur, scales, chainmail, and bases. It is less ideal for clean power armor, where controlled edge highlights look sharper.
Paint faces, weapons, and tiny details last
Details are where a miniature starts to show personality. Paint lenses, purity seals, teeth, gems, insignia, and weapon glow after the major colors are settled. Keep the process simple: a dark color, a brighter spot, and a tiny pale dot can make a lens read as glass from a few feet away.
For faces, begin with a mid-tone skin color, add a light wash to define the eyes and mouth, then place a lighter skin tone on the nose, cheekbones, and brow. Do not stress over painting pupils on standard infantry. At tabletop distance, clean contrast around the eyes looks better than two tiny black dots staring into the warp.
Metallic weapons benefit from contrast. Basecoat them in a dark metallic or dark gray, shade the recesses, then add a bright silver highlight along the sharpest edges. A small spot of brown, orange, or dark red near joints can suggest grime or rust, but use weathering with purpose. A pristine Ultramarines parade force and a battered Death Guard patrol should not tell the same story.
Make the base part of the miniature
A painted base frames the model and makes an army feel unified. Even a simple scheme does the job: texture paste or sand, a brown basecoat, a drybrush of tan, and a few grass tufts. Match the base style across your force so the squad looks like it is fighting on the same world.
Think about contrast when choosing base colors. A red-armored force stands out against cool gray rubble. Green Orks look great on dusty earth or snow. If your miniatures are already busy with bright armor and elaborate details, keep the base calmer so it does not compete for attention.
Avoid the mistakes that slow beginners down
The most common issue is paint that is too thick. If details start disappearing, stop, let the model dry, and use thinner paint on the next layer. The second is trying to finish every miniature to display-case level before starting the next. For a playable force, paint in batches of five or ten models. Complete one step across the batch, then move to the next color.
Also resist buying every paint suggested by a color recipe. Start with the colors you need for your chosen army, then expand when you understand what you enjoy. A tight palette produces a more coherent force and leaves room in the hobby budget for the next box that calls your name.
Finally, protect completed models with a matte varnish once they are fully dry. Matte varnish reduces shine and helps guard against handling during games. If you want glossy lenses, slime, or wet gore, add a small amount of gloss varnish only to those details after the matte coat.
Your first miniature is a timestamp, not a final exam. Keep it. A few months from now, when your brush control is steadier and your next squad has sharper highlights, you will see exactly how far your collection has come. Put paint on that model, make it yours, and send it proudly into the next battle.






